Ps3 Modchip Products
Installing a modchip into your PS3 can be a bit of an intimidating task. Unless you’ve been mounted to a soldering iron and have the smart confidence in your bonding capacities - you’re probably scratching your head wondering if you’ll be able to do it.
There is a good side to all of this though. Most PS3 modchip manufacturers have recognized that not only do they need to see that their ps3 modchips have characteristics on top of features, but that they should also be relatively simple to establish. I mean lets face it, not every single Playstation 3 owner has operated with electronics and soldering irons. In Point Of Fact, some of us have probably never reached a soldering iron.
Modchip installation is not however for everyone. And I would urge anyone, that has not yet purchased their PS3 system but plans to purchase it and immediately add a modchip, to check out the different Pre Modded PS3 systems available for sale online. There are some online stores that have pre modded ps3 systems for sale and often times you’re paying just a nominal fee for the pre installation of the modchip, when you consider that you would need to purchase the modchip, ps3 system as well as the soldering tools and supplies, if you don’t have them already.
Alright, now let’s move on to the tips and suggestions to ensure you have a successful PS3 modchip Installation.
You demand the right soldering iron: You don’t need to get a soldering iron with a tip the size of your pinky finger, or one that heats up to the point of melting the ps3 main board. You desire a bonding iron that has a small, fine tip, making it easy to set up the ps3 modchip when you must solder to the smaller sections of the motherboard. Use thin, 15 AWG Wrapping Wire: You can also get this wire at almost every single Radio Shack Store. Far too often, an ps3 modchip installation is botched simply because of the wiring that is used.
Some of the solder points are small, requiring precision. While you don’t have to be an expert a soldering, you DO have to take your time, making sure and double checking every single connection. Get the RIGHT chip for YOUR Playstation 3 console model number. Before you buy your ps3 modchip, make sure to check which version you have. You can do this by going to Google.com and searching for PS3 MODEL IDENTIFICATION and you’ll see results from numerous web sites offering a listing of all PS3 Model numbers. You can of course opt for a Universal PS3 Modchip, this will do away with having to find out your model number in advance, because the universal PS3 modchip like the Modbo 4.0, will work in every single Playstation 3 console on the market today.
There is absolutely no need to be intimidated by a PS3 modchip installation. I myself am not really good at bonding, but I was able to complete the installation from begin to complete within 50 minutes. I am including taking apart and putting back together the PS3 as well. Bonding time and wiring was about 30 minutes of the 50 minute job. Remember, I do have steady hands, and I did purchase all the good tool for the job.
To get more selective information on the PS3 modchip or the sort of PS3 modchip products and installation diagrams, please visit www.theps3downloadsreview.com



